TEAMGROUP MP44L - SSD - 500 GB - internal - M.2 2280 - PCIe 4.0 x4 (NVMe)

TEAMGROUP MP44L 500GB Gen4 NVMe SSD

Upgrade a compatible desktop PC or laptop with the TEAMGROUP MP44L 500GB M.2 NVMe SSD. Its PCIe Gen4 x4 interface delivers rated sequential speeds up to 5,000MB/s read and 2,500MB/s write, while the compact M.2 2280 design and graphene heat-dissipating label fit supported systems. Check your device’s slot and clearance before buying.

Key Features

• 500GB capacity: Store an operating system, applications, documents, projects and selected games.
• PCIe Gen4 x4 interface: Connects to a compatible M.2 PCIe NVMe slot for high-speed storage access.
• NVMe technology: Provides a fast internal storage option for supported desktop PCs and laptops.
• Sequential read speeds up to 5,000MB/s: Manufacturer-rated performance for compatible systems and workloads.
• Sequential write speeds up to 2,500MB/s: Manufacturer-rated performance; actual results vary by system and workload.
• Graphene heat-dissipating label: A slim thermal design that helps spread heat without a bulky drive heatsink.
• SLC caching: Helps accelerate supported write operations. Sustained write speeds may change after the available cache is used.
• Storage-management features: Supports LDPC error correction, TRIM and S.M.A.R.T. monitoring on compatible systems and software.
• DRAM-less design: Built without a dedicated onboard DRAM cache.
• Model number: TM8FPK500G0C101.

Specifications

• Product type: Internal solid state drive (SSD)
• Brand and series: TEAMGROUP MP44L
• Capacity: 500GB
• Interface: PCIe Gen4 x4
• Protocol: NVMe
• Form factor: M.2 2280
• Sequential read speed: Up to 5,000MB/s
• Sequential write speed: Up to 2,500MB/s
• Dimensions: Approximately 80 × 22 × 2.25mm
• Weight: Approximately 7g
• Cooling feature: Graphene heat-dissipating label
• Warranty: 5-year limited manufacturer warranty, subject to the manufacturer’s terms and endurance limits.

Material and Finish

The drive is an M.2 solid state storage module with a slim graphene-based heat-dissipating label. A separate heatsink is not specified as part of the drive. The exact PCB material and surface finish are not provided.

What’s Included

• TEAMGROUP MP44L 500GB M.2 NVMe SSD (TM8FPK500G0C101)

How to Use

1. Check that your computer supports an M.2 2280 PCIe NVMe SSD. An M.2 SATA-only slot or a 2.5-inch SATA bay is not compatible with this drive.
2. Turn off and unplug the computer before installation. Follow the computer or motherboard manufacturer’s instructions for accessing the M.2 slot.
3. Insert the SSD into the compatible M.2 slot and secure it as directed. If your system has an M.2 heatsink, follow its installation instructions and check that there is sufficient clearance.
4. Close the system and power it on. Initialize or format the drive in your operating system if required.
5. To use the SSD as a boot drive, install or migrate your operating system using the appropriate setup process.

Compatibility and Performance Notes

• Confirm your system’s M.2 slot supports PCIe NVMe before purchase; M.2 describes the form factor and does not by itself guarantee compatibility.
• The listed speeds are maximum manufacturer-rated sequential benchmark figures. Actual performance depends on system configuration, workload, temperature and other conditions.
• Available formatted storage may be lower than the stated capacity because of formatting and system reporting differences.
• An SSD can reduce storage-related loading delays compared with a mechanical hard drive, but it does not guarantee higher game frame rates.